Haier heatpumps

Environmentally friendly
The Haier Super Aqua air-to-water heat pump uses free renewable energy from the outdoor air as a heat source for space cooling, heating and hot water.
This energy-efficient and environmentally friendly solution significantly reduces energy consumption, operating costs and CO2 emissions in heating compared to conventional oil and gas boilers.
All Super Aqua products use the future refrigerant: R290 which has been shown to have a remarkably reduced environmental impact compared to other refrigerants such as R4 lOA.

Comfort
Haier Super Aqua Monobloc offers an integrated solution to ensure total comfort in your home. The leaving water temperature ranges from 5°C to 60°C, providing comfortable cooling and heating for users. In addition, the production of hot water for domestic use is guaranteed all year round.
The terminal box ATW-A0l makes it possible to manage the production of domestic hot water. Hot water with the 3-way valve to be installed externally on the unit. By combining the applications in a system, it is possible to choose the most suitable type of application for every environment and to meet every need.
Low noise level
Several noise-reducing measures ensure a low noise level.
Covered with soundproof material, blocking the noise reduction of the compressor; Mounted on rubber vibration dampers for quiet operation and low vibration.
Brushless DC fan motor and aerodynamically optimized impeller for noise and vibration reduction.
New structure and optimized design of the pipeline effectively prevent pipeline noise and vibration.
Het geluidsvermogensniveau van de Super Aqua bedraagt slechts 39 dB(A).

Energy efficiency
Full DC inverter double rotary compressor has smaller size and higher efficiency. Motor with stepless variable frequency speed control saves energy. The introduction of a water-cooled canned rotor pump ensures lower noise levels and higher efficiency.
High reliability
Multi-sensor protection is designed to prevent freezing of the water system. In the winter when the sensor detects that the water temperature is lower than 3°Cthe pump is turned on to prevent the water system from freezing.
The flow switch monitors the water flow and alarms when it falls below the minimum flow value to prevent freezing of the water system due to the low flow in cooling mode.
Wide operating range
The leaving water temperature, ranging from s•c to 60°C, provides comfortable cooling and heating for users. A maximum supply water temperature of 60°C can be achieved even if the outdoor temperature drops to -25°C (5kW unit).
With a capacity range of 5 kW to 16 kW, Haier Super Aqua is suitable for both residential and small commercial application scenarios. Small capacity units are mainly used in new-build homes with their improved insulation materials. Medium capacity products are mainly used for renovations. Large capacity products can be installed in small commercial applications such as cafes, restaurants, hair salons and the like.

Easy operation and installation
Controle
A modern white finish and touchscreen design make the controller clean, bright and fashionable. And the backlight and intuitive icon make it simple and easy to use. The built-in weekly timer allows preset automatic operation and any error codes are displayed, as well as a history log kept to make maintenance operations easier.
Installation
The compact design allows the unit to be installed even when space is limited.
Which heat pumps can you currently order from us?
At this moment we have 3 heatpumps available in our webshop which all can be purchased with government subsidy getback (after installation).
Our Haier heat pumps are efficient, have user-friendly controls and are easy to install.
Switch to a Haier heat pump now.
Haier heatpump boilers

What is a heatpump boiler?
Our range of heat pump boilers provides an immediate solution to your hot water needs. It combines the renewable energy of an aerothermal source with a storage capacity of
80-300 L, allowing it to adapt to a wide range of applications ranging from small homes to light commercial applications.
This system provides hot water at a fraction of the cost of older technologies, and the installation involves only water pipes, so it is suitable for updating previous hot springs water installations simply and easily.
How does it work?
To understand the concept of heat pumps, imagine a refrigerator that works in reverse. While a refrigerator removes heat from a closed box and releases that heat into the surrounding air, an HPWH takes the heat from the surrounding air and transfers it to water in a sealed tank.
A refrigerant (R134A) changes state through compression and expansion cycles, absorbing heat in the air at low temperatures and then transferring it to domestic water at a higher temperature.

Condensor design
Bottom coil
An additional coil is mounted on the bottom of the tank increases the heat exchange area to provide more hot water and contributes to better efficiency.
Micro-channel capacitor
The micro-channel condenser has a larger contact surface for better heat transfer performance and less refrigerant consumption.
Microchannel capacitor VS spiral pipe

Multi-channel design
Each piece of a microchannel has 18 microchannels, which compared to the single-channel spiral pipes offer much more contact surface.
veel meer contactoppervlak bieden.

Titanium - aluminum alloy for better corrosion & heat resistance
Microchannel: 1500 hours salt spray test
Microchannel: 1500 hours salt spray test

Reduces the pressure drop
Microchannel: pressure drop 0.03 MPa
Flushing line: pressure drop 0.15 MPa

Larger contact surface
Micro-channel: contact oppervlak 0.708m2
Coil pipe: contact oppervlak 0.236m2

Monobloc
Use in combination solar panels
You can use the unit in combination with photovoltaic energy and
set it to optimize the use of electricity.
Makkelijk te installeren
Onze monoblock-warmtepompboiler kan eenvoudig worden geïnstalleerd ter vervanging van een traditionele elektrische wateropslag verwarming.
Vergeleken met de split-warmtepompboiler, is een monoblock flexibeler waar het kan worden geïnstalleerd. Bij installatie op locaties zoals een kelder, biedt een monoblock voordelen voor koeling en ontvochtiging.
Snel verwarmen en compact ontwerp
De krachtige compressor maakt sneller verwarmen mogelijk. Door het compacte ontwerp gebruik je veel minder ruimte.
High efficiency/economy
*A+ Energy class
* Mogelijkheid tot meerdere energiebronnen (alleen HP250M3C)
* Multiple power source capability (HP250M3C only)
* Microchannel condenser
* Off-peak electricity carpentry setting
* ECO mode - only heat water with heat pump
* Holiday mode - for optimal system usage
Which heat pump boilers can you currently order from us?
Our Haier Heat Pump Boilers are environmentally friendly, do not take up much space and are easy to install.
Make the switch now to a heat pump boiler from Haier.